47
Using PowerTouch
How Do I Operate Devices?
You have to assign disc and track titles to the discs in your CD player
before you can transfer them to PowerTouch. See your CD player’s in-
struction manual for more information about assigning disc and track
titles.
To read the loaded disc titles and store them in PowerTouch:
1. Touch (HOME1) on the Quick Access menu.
2. Touch (CD1).
3. Touch . This accesses the disc mode commands:
4. If you haven’t already done so on the CD changer, touch .
This reads all of the disc and track title information into the CD
changer’s memory.
5. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Select . Do not move
PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you
have loaded. When the IR light on the receiver goes out, the receiver
is done sending the information to PowerTouch, and you may move
PowerTouch again. PowerTouch’s memory now contains the disc titles
of every CD in the changer with title information.
6. Touch to return to the CD controls.