30 EN
Receiver Operations
Some preparatory steps are needed before starting playback.
Turning on the receiver
1Turn on the power to the related components.
2Turn on the power to this receiver by pressing the
POWER ON/STANDBY or the ON/STANDBY key (or
the POWER RCVR key).
÷After turning off a power supply, the POWER ON/STANDBY
or the ON/STANDBY key is not effective for 3 seconds.
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 1), OPT 1 (VIDEO 2), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used. 9
Normal playback
VOL /
VOLUME CONTROL
INPUT SELECTOR
Input selector keys Input selector keys
Listening to a source component
1
Press the INPUT SELECTOR key (or the Input selector keys/
DVD, VID1, VID2, AUX, F.AUX, Game, TUNER, Network Server
or Memory Card) to select the source.
1"TUNER"
2"DVD"
3"VIDEO1"
4"VIDEO2"
5"GAME"
6"F.AUX"
7"AUX"
8"NET SERVER"
9"MEMORY CARD"
÷When the “NET SERVER” or “MEMORY CARD” input is
selected, the OSD function on the TV screen is activated and
detection of the server starts. RO
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOL +/- keys) to
adjust the volume.
POWER RCVR
Input Mode
RCV Mode
INPUT SELECTORON/STANDBY
POWER ON/STANDBY
*5489/30-37/EN 04.7.30, 10:40 AM30