Let's put out some sound 27
XD SERIES (En/E2)
| To wind tape at high speed |
|
| To stop playback | ||||
|
|
|
|
|
|
|
|
To fast wind in direction | To fast wind in direction \ | ||||||
|
|
|
|
| 7 | ||
1 |
|
|
| ||||
|
| ¡ | |||||
Press while in
the stop mode÷Do not take out the cassette tape until the tape transport has stopped completely.
÷Press the 7 key to stop fast winding.
O p Lights
R REV.MODE
Each press switches the modes as follows.
1 “[” ... Both sides are played back (recorded), and then the tape stops (When 2key is pressed, only one side is played back (recorded).
2“”” .. Both sides are played back endlessly. (The tape stops after recording onto both
sides.)3““” .. Only one side is played back (recorded), and then the tape stops.The Dolby NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with Dolby NR ON, be sure to set the DOLBY NR ON for playback.
Lights
DOLBY NR REV
Each press switches the modes as follows.
1 “DOLBY NR indicator” ON........ DOLBY NR is used.2“DOLBY NR indicator” OFF........ DOLBY NR is not used.÷Select the Dolby NR mode according to the recording condition of the tape.
section Preparation
section Basic
÷Normal (TYPE | ), high (TYPE |
| ), or metal (TYPE |
| ) tape selection is |
set automatically. |
|
| |||
÷Remove tape slack before loading.
÷Close the door securely.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the
section Application
23
Transport direction | Transport direction |
The 2 and 3 indicators indicate the current direction in which the tape advances when playback or recording is started automatically by the easy operation function, etc. This direction is the direction stored in memory when the tape was last stopped. (To switch the tape transport direction, press the play key corresponding to the desired direction then press the stop (7) key.)
sections Knowledge