STEP 3 Assemble Console
1.Insert console cable/cables #14 and #18 through the holes on the console base before setting the console on the base.
2Secure and tighten console in place with
two screws #7, M8x30mm and two flat washers #1.
3.Connect console cable #14 to upright cable #13 from the bottom.
4.Also connect contact HR cables #18 to #19 together from the bottom.
5.For model TX3 only: Connect extension key
cables #16 to #17 and #17 to #15 together on both sides of the console from the bottom.
Owner’s Manual | 33 |