6.Sanitizing / Cleaning the Puncture Mechanism (P.M.)
A
FOR PROPER SANITIZING / CLEANING OF THE PUNCTURE MECHANISM, THE FOLLOWING ITEMS ARE RECOMMENDED.
A.DISHWASHING LIQUID SOLUTION OR SOAP & WATER IN A SPRAY BOTTLE.
B.MINI SCRUB BRUSH FOR CRAMPED AND TIGHT AREAS [i.e. AS SHOWN, McMASTER- CARR PT NO. 7243T22].
BC. CLOTH FOR WIPING.
D. ACCESS TO A SINK (IDEALLY WITH FRUIT
CSPRAYER) OR A BUCKET OF WATER FOR RINSING. SEE IMAGES 18 AND 19.
A. Sanitizing/Cleaning the B3000 Inlet Needle and Gasket
1.DEPRESS NEEDLE PLATFORM TO EXPOSE INLET NEEDLE AND THE INLET NEEDLE GASKET. LOOK FOR TEARS OR OTHER NON FUNCTIONING CONDITIONS.
2.WHILE DEPRESSING THE PLATFORM REMOVE STUBBORN PARTICLES BY USING BRUSH AND WATER.
B3000 SERVICE MANUAL
3.WIPE THE NEEDLE AND GASKET AREA CLEAN USING A DRY CLOTH. PERFORM THREE CLEANSING BREWS (BREWS WITHOUT K- CUPS) TO RINSE OUT NEEDLE.
64