After plugging the DTVP-M device into a USB port, if you receive the following warning message, “Kingston DataTraveler requires an active SafeConsole server to make it operational” (see Figure 1.3), please contact your helpdesk or SafeConsole Administrator.
The DTVP-M must be able to communicate with a SafeConsole server in order to initialize prior to first use and/or function properly after a device reset.
If you receive a connection window similar to the one in Figure 1.4, ‘Connecting to <server>’, click ‘Yes’ to confirm ownership and responsibility for the Kingston DataTraveler (DTVP-M.) This will register your device on the SafeConsole server.
If you click ‘No’, you will receive the warning message seen in Figure 1.3 and be required to start the initialization process over. This can be accomplished by doing one of the following:
Figure 1.3 – Warning Message
Figure 1.4 – Confirm Registration
•Unplugging the DTVP-M device from your system and re-inserting it into the USB port. (This will allow Windows to detect the device again and allow you restart the initialization process.)
•Browsing to the CD-ROM partition of the DTVP-M and re-launching the DTVPM_Launcher.exe program application.
The window shown in Figure 1.5 will appear after you click ‘Yes’ to register the DTVP-M on the SafeConsole Management System. This indicates that communication with the server has been established.
Figure 1.5 – Connection Confirmed
DTVP-M Help | DataTraveler® Vault – Privacy Managed | Page 2 of 6 |
