12
OPERaTINg ThE FOOd PROCESSOR
Installing the multipurpose blade or dough blade
2Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
3Install the work bowl cover, being sure
it locks into place.
1Place the blade on the power shaft.
Rotate the blade so it falls into place on
the power shaft.
aSSEMblINg ThE FOOd PROCESSOR
3With the work bowl installed, slide the
drive adapter onto the power shaft. 4Install the work bowl cover, being sure
it locks into place.
TIP: You may need to turn the disc/drive adapter until it drops down into place.