D-12 A-61408 September 1995
8. Check for any accumulation of ink on the jets or face of the
ink cartridge. Wipe any ink from the jets and face with a
clean, dampened, lint-free cloth.
Jets
Ink Cartridge
Face
9. Prime the ink cartridge by carefully inserting the end of a
paper clip into the hole at the end of the ink cartridge and
gently pushing in on the bladder. Allow a small amount of ink
to escape through the jets.
Ink Cartridge
Bladder (inside ink
cartridge)
10. Remove the paper clip and observe the ink flow back into the
bladder through the jets.
11. Use a dry, lint-free cloth to wipe the face and jets of the ink
cartridge.
12. Slide the ink cartridge back into the carriage.
13. Lower the holding bar back down to its original position.
14. If necessary, wipe the carriage clean with a dry, lint-free cloth.
15. Wipe the Rear Document Printer Mounting Plate clean of any
ink deposits.
16. Press the carriage spring clips together to place the Rear
Document Printer Carriage into the Rear Document Printer
Mounting Plate.
17. Close the Upper Access Door.
18. Perform the Print Test Function.