Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals

IncorrectCorrect

Pick up the film cartridge as shown above, with the emulsion side facing up. Slide the end of the film obliquely from above into one of the slots of the take-up spool, making sure that the film is gripped by at least one of the retaining clips and projects under the next clip.

Pull up the rewind crank as far as it will go and insert the film cartridge in the empty cartridge chamber, then push in the rewind crank. The edge of the film must be parallel with the film guide. As you move the quick-wind lever, the sprockets of the transport drum must engage in the edge perforations of the film.

Use the quick-wind lever to wind the film one frame forward, to ensure that it lies tensioned in the film guide and that the mouth of the cartridge does not project too far. You may occasionally wish to take out a partly exposed film and later insert it again.

7