Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals

Flash as fill-in:In shutter priority: all shutter speeds from 4s to 1/90 s, with faster shutter speed settings automatic switchover to 1/100 s.

Automatic switchover between flash as main light source and fill-in flash:

In automatic program mode: automatic switchover to 1/100s. Flash intensity dosaged via TTL-control metering, depending on ambient light (flash as main light source, fill-in flash or no flash effect).

Flash exposure metering: center-weighted, integral.

Photocell for TTL-flash exposure control: Silicon photodiode, next to photocell of exposure meter, protected from stray light in lower part of camera.

Film speed range for TTL flash-exposure control: ISO 12/12° to ISO 3200/36°.

Exposure override for flash exposure metering: plus/minus 3 Ev in half-values.

Shutter: Electronically controlled focal-plane blade shutter, vertical action.

Shutter speed setting dial: easy-reach 6.5mm height; centrally positioned exposure release button.

Electronically computed shutter speeds: For automatic programs continuous from 16s to 1/2000 s. Manual settings from 4s to 1/2000 s in half values.

Mechanical shutter-speed settings:

"100 " = 1/100s flash synchronization, or in case of battery failure. "B" for time exposures of any length. (Exposures in "B"-setting electronically controlled when using drive in 4 fps setting)

Mirror system: Semi-transparent, vacuum coated swing mirror, coated with 17 layers, reflects 70% and transmits 30% light, backed by Fresnel reflector (1345 micro-reflectors) to concentrate light on exposure meter's photocell.

Film transport: Single-movement quick-wind lever (130° movement), optional MOTOR-W1NDER-R (2 fps) or MOTOR-DRIVE-R (single frame, 2fps, 4fps).

Frame counter at top of camera: frame count in ascen-ding values. Automatic reset to "0" when camera back is opened. Built-in reading magnifier.

Multiple exposures: Press rewind locking button. Auto- matic reset when shutter is cocked; exposure counter does not move forward. Any number of exposures possible. Multiple exposures also possible with motorized film advance units.

Film rewind: via hinged crank lever at top left of camera.

Shutter release: Shutter-release button with standard thread for cable release. Press down 0.3mm to first pressure point to switch on (viewfinder LEDs light, exposure meter switched on). Press down approx. 0.9

mmto second pressure point to activate memory for exposure metering value. Press down approx. 1.35mm for electromagnetic shutter release for electronically computed exposures. Press down approx. 2mm for mechanical release ("B" and "100 ").

59