Appendix

Dirt on the battery contacts can affect battery life. Wipe the contacts with a clean, dry cloth before loading batteries in the camera.

Battery performance is reduced at temperatures below 41° F (5° C). When using your camera in cold weather, carry spare batteries and keep them warm. Do not discard cold batteries that do not work; when they return to room temperature, they may be usable.

Battery charging options

Visit www.kodak.com/go/z710accessories for:

Kodak EasyShare camera dock series 3—powers your camera, transfers pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.

Kodak EasyShare printer dock series 3—powers your camera, makes

4 x 6-in. (10 x 15 cm) prints with or without a computer, transfers pictures, and charges the Kodak Ni-MH rechargeable digital camera battery.

Kodak 3-volt AC adapter—powers your camera.

IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock or printer dock to power your camera.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). See www.kodak.com/go/z710downloads.

Additional care and maintenance

If the camera has been subjected to inclement weather or you suspect water has gotten inside the camera, turn off the camera and remove the batteries and card. Allow components to air-dry for at least 24 hours before using the camera again.

Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as

58

www.kodak.com/go/support

Page 64
Image 64
Kodak Z710 manual Battery charging options, Kodak 3-volt AC adapter-powers your camera