IR REMOTE CONTROL RC-3 (SOLD SEPARATELY)

3.Lift your finger from the shutter-release button, then recompose the picture.

4.Point the remote control toward the front of the camera, press either the Release button (•) or Delay button (2s).

•The green ready lamp keeps glowing and the focus will remain locked after taking a picture.

•Reset the remote-control mode or press the zoom button to cancel focus hold.

40

CHANGING THE BATTERY

D

The remote control uses a 3V lithium battery (CR2032).

 

When pressing the remote-control buttons does not release

 

the shutter, the battery must be replaced. (The supplied

 

battery should be sufficient for approximately ten years of

 

operation).

 

1.

Pull out the battery chamber and remove the old

E

 

battery (D).

2.

Insert a new battery into the battery chamber with

 

 

its plus side up (E).

 

3.

Slide the battery chamber back into the remote

 

 

control.

41