LOADING THE FILM

Use only 35mm, DX-coded film rated ISO 25 to 3200.

• ISO 400 film is recommended for best results.

• Always load and unload film in subdued light.

• Do not use Polaroid instant 35mm film. Winding problems may occur.

1. Slide the back-cover release down to open the back cover, then place the film cartridge into the film chamber.

• Once the film is loaded, the back cover will lock until the film rewinding is complete, preventing accidental opening. If the release lever is slid to the open position, “CLOSEd” will appear in the data panel.

10

2.Extend the film tip to the "FILM TIP" mark, making sure it lays flat.

OK

3. Close the back cover.

•The film automatically advances to the first frame

and appears in the data panel.

•If the film has been loaded improperly, will blink in the data panel and the shutter will remain locked. Open the back cover and repeat the loading procedure.

11