31
Options
1. Output tray 2
(elevated tray)
Collects copies that are fed out.
2. Output tray 1
(non-sorted copy tray)
Collects copies that are fed out.
3. Lever FN1
Lowered when clearing paper misfeeds within the finisher.
4. Dial FN2
Turned when clearing paper misfeeds within the finisher.
5. Hole-punch waste container
Removed when emptying hole-punch waste that has
accumulated from using the punch settings.
6. Lever FN3
Lowered when clearing paper misfeeds within the finisher.
7. Lever FN4
Lowered when clearing paper misfeeds within the finisher.
8. Staple cartridge holder
Removed from the stapler unit when replacing the staple
cartridge or clearing jammed staples.
9. Dial
Turned to move the staple cartridge holder to-ward you when
replacing the staple cartridge or clearing jammed staples.
10. Dial FN5
Turned when clearing paper misfeeds within the finisher.
11. Dial FN6
Turned when clearing paper misfeeds within the finisher.
6. Parts Identification
Saddle Stitcher SD-502
1. Copy output tray
Collects copies.
2. Misfeed-clearing door
Opened when clearing paper misfeeds within the finisher.
Mailbin Kit MT-501
3. Mailbins
Collects printed pages.
4. Misfeed-clearing door
Opened when clearing paper misfeeds.
5. Output tray cover
Opened when clearing paper misfeeds.
Saddle Stitcher SD-502/Mailbin Kit MT-501
Finisher FS-508
3
4
56789
10
11
1
12
2
5
3
4
2
1
Output Tray OT-601
12. Optional output tray
Collects copies.
Punch Unit PU-502
13. Punch Unit*
Punches holes for filing printed pages when punch unit is
installed onto finisher.
*The internal options are not shown.