Utility mode 11

C450 11-9

11.2.8 Header/Footer Position

Administrator Setting >> Fax Setting >> Header/Footer Position

Set the method of specifying the sender information and the reception infor-

mation. (page11-31)

11.2.9 Telephone Line Settings

Administrator Setting >> Fax Setting >> Telephone Line Settings

Set items relevant to transmission and reception. (page11-34)

Item Description Available value
Header Position
*1 Set a position in which the sender information
is printed.
Inside Body Text / Outside
Body Text* / OFF
Footer Position Set the reception time and the reception
number if they are printed or not on the docu-
ment received.
Inside Body Text / Outside
Body Text / OFF*
*1:The displays are different depending on the country.
Item Description Available value
Dialing Method
*1 Set the method of dialing. PB* / 10pps
Receive Mode S et to [Auto RX] for automatic reception. And
set to [Manual RX] when a lot of telephone calls
are made with an external telephone connect-
ed or when the remote reception function is
employed.
Auto RX* / Manual RX
Number of RX
Call Rings
Set the number of receptions.
Set the number of the pseud-ringback tones
from the arrival of a message to the start of re-
ception.
0-15 (2 times*)
Number of Redi-
als *2 Set the number of redials when no response is
available due to the other party being busy.
0-7 (3 times*)
Redial Interval Set the intervals between the redials. 1-15 (3 min.*)
Line Monitor
Sound
Set to ON when you want to hear the sound on
the line through the speaker while in transmis-
sion.
ON / OFF*
Line Monitor
Sound Volume
Set the sound volume of the speaker. 0-31 (16*)
*1:The displays are different depending on the country.
*2:The line which can be set up is different depending on the country.