
Battery Exhaustion
The LED indicator will change from green to
When this happens, replace the batteries promptly.
Important – Please Read Before You Begin
● Battery life |
|
Number of pictures | about 100 |
Continuous Playback time | about 30 min. |
Note: The above figures are based on tests carried out by Konica understandard conditions (one picture every 30 seconds, including erase operations). The actual battery life, however, depends on the type and manufacturer of the batteries used.
●If the camera is left idle for about two minutes with the main switch set to REC or PLAY, it will turn off automatically. (To resume operation, set the main switch to OFF and then to REC or PLAY again.)
4. Taking Pictures
Note: The LCD monitor cannot be used as a viewfinder. Use the optical viewfinder when taking pictures.
1 Set the main switch on the side of the camera to REC. (Figure 1)
The LED indicator will light green after blinking red.
The status LCD will display the number of pictures that can be taken. (Figure 2)
2 Arrange your picture in the viewfinder and press the shutter button.
The camera will take a picture with a beep tone. You can continue taking pictures until the status LCD shows “0”.
Note: When there is no memory left for taking pictures, the camera will not shoot and no beep will be heard when the shutter button is pressed. Transfer any recorded images you wish to keep to the computer and then erase them to make space for more pictures.
4