Using the Set-up Menu (Cont’d)

Specifying custom settings

-You can use this feature to disable individual settings for the modes in the Manual Mode menu (p.74).

-You can also use this procedure to enable the Custom settings (p.83).

-If OFF is selected in this setting, only the default modes are valid and the specified mode functions are disabled.

Select “CUSTOM” and press the SET/ DISP. button to display the settings screen. Modes set to ON are marked with a tick ().

Use the  or  buttons to select a mode and the SET/DISP. button to set the mode to ON or OFF.

To enable the Custom settings (p.83), select “CUSTOM” and press the SET/ DISP. button.

• You can also disable settings in each mode.

Restoring the defaults

-This feature allows you to change all the settings you have specified in the shooting mode menus and the setup menu back to their defaults settings at once.

When you select “DEFAULT” and press the SET/DISP. button, a confirmation screen appears.

Use the  or  button to select “YES” and then press the SET/DISP. button.

•If you select “NO”, the setting is ignored and the SET-UP menu screen reappears.

120