Inserting/Removing Cards (Cont’d)

Card Removal

1. Open the battery/card cover.

2. If you gently push in on the card, the lock will release and the card will come out a little. Then carefully draw the card out.

3. Again, close the battery/card cover.

Warning! Insert or remove cards only after making sure that absolutely all power is OFF as indicated by the viewfinder LED being off.

While the card is being accessed, or an image is being processed, the LCD monitor will show “Now COPY…”, etc., and the green LED will come on.

If you open the battery/card cover while the green LED is lit, image processing may be interrupted or hindered. While the green LED is still lit, make sure that you DO NOT open the battery/card cover.

•Also, it is possible to insert and use two cards simultaneously, such as an SD memory card (or multi-media card) and a Memory Stick.

When 2 cards are inserted at the same time, recording priority is given to the card that was used first. This priority can be changed in the menu settings (p.60).

27