Selecting the Flash/Macro Mode

-You can set the flash mode and macro that best suits the subject.

-Once a mode is set, you can shoot continuously. It is recommended that the mode should be returned t o AUTO mode (no display) after shooting.

-Also, when you turn the camera OFF, the macro-mode you set is canceled and the camera automatically returns to AUTO-mode shooting operation (no display). But the flash-mode setting remains in effect even if you switch the power OFF and back ON.

1. Turn the power on so that the LCD monitor is lit.

2. By pressing ￿ or ￿, bring up the desired mode icon on the LCD monitor.

Pressing ￿ enables the selection of the following modes.

1) AUTO (Automatic Flash)

(p.45)

2)

Fill-In

(p.45)

3)

Off (Flash Override)

(p.46)

•Every time ￿ is pressed, the mode symbol will be displayed one by one, through the list.

Pressing ￿ enables the selection of the following modes.

1) AUTO mode (no display)

(p.45)

2)

Macro-photo mode

(p.46)

•Every time ￿ is pressed, the mode symbol will be displayed one by one, through the list.

44