Using the Set-up Menu (Cont’d)

Setting the AE-Lock to “ON”

If you press ￿ while activating focus lock (pressing the shutter button half-way on page 34), the exposure setting locks and the AE lock icon appears on the LCD monitor. The setting becomes effective even after you take a shot.

*To cancel the AE-lock, turn the camera’s power OFF, press the Zoom, MENU/ SET, or PLAY button, or change the white balance setting.

4)You can also set the sequence shooting to on or off. If you set it to on, this feature lets you take a sequence shot by holding down the shutter button.

* If you are taking photos with the flash, make sure that the flash is fully charged

before taking next photo.

1

2

1.Select “CUSTOM” and press ￿. The settings

screen appears. Select the desired setting with ￿ or ￿, and press either ￿ or the MENU/SET button.

2.In screen 1, select “FLASH” and press ￿.

The flash mode settings screen appears. Select the desired mode with ￿ or ￿, and press either ￿ or the MENU/SET button to

change the setting. When the setting is completed, press ￿ to return to screen 1.

102