Selecting the Shooting Mode

-Selecting different shooting modes enables you to create the best shooting condition for your subject.

-Once a mode is set (apart from the self-timer), you can shoot continuously. It is recommended that the mode should be returned to AUTO mode (no display) after shooting.

-You can set the self-timer for a 3- or a 10-second delay (factory setting), although the 10-second setting is effective for the next shot only. The 3- second setting remains in effect until you change it again.

-Also, when you turn the camera OFF, the shooting mode you set is canceled and the camera automatically returns to AUTO-mode shooting operation (no display). But the flash-mode setting remains in effect even if you switch the power OFF and back ON.

-Using the custom function (p.107) enables you to set up your favorite shooting modes.

1.Turn the power on so that the LCD monitor is lit.

2.By pressing  or , bring up the desired shooting mode symbol on the LCD monitor.

Pressing  enables the selection of the following modes.

1) AUTO (Automatic Flash)

(p.40)

2)

Red Eye Reduction

(p.40)

3)

Fill-In

(p.41)

4)

Slow Sync

(p.41)

5)

Off (Flash Override)

(p.41)

•Every time  is pressed, the mode symbol will be displayed one by one, through the list.

38