BASIC OPERATION

TAKING PICTURES IN AUTOMATIC MODE

Full Auto mode is the camera’s standard operating mode and is suited for use in almost any situation. When the Program-reset button is pressed, the camera is returned to fully-automatic operation. See page 72.

1 With the Control dial lock button pushed in the direction, turn

the Control dial to REC or .

2 Press the Program-reset button to set the camera to Full Auto mode.

3 Turn the zoom ring on the lens until the subject is the desired size in the viewfinder (this applies only to the zoom lens).

4 Center your subject in the focus frame [ ] and press the shutter- release button partway down to

activate autofocus. or will glow when the subject is in focus.

36