FLASH

PC TERMINAL

This camera is equipped with a PC connector which enables you to connect PC-capable flash units with a flash sync cord.

Set the exposure mode to M, then set the shutter to 1/125 or slower.

Manually set white balance to the flash mode (see page 58).

• Turn the flash unit off before connecting the sync cord to the PC terminal or the flash unit may fire unexpectedly while connecting.

•Your camera’s PC terminal is compatible with both center-positive and center- negative flash units.

•Flash units with an extremely low trigger voltage may not work with the camera. If your flash has a low trigger voltage, contact a Minolta Service Facility.

80