Korg Ax3000b - page 61

IntroductionPanel TourSetupPlayingCreating

and Storing

Effect TypePedals

ESS

Index

MIDI/DIGITAL

Factory

settings

Trouble-

shooting

Spec. TunerAppendix

Restoring the Factory Preset

Programs

ere’s how you can restore the AX3000B’s programs and settings to the

state in which it was shipped from the factory.

NOTE: Executing this procedure will erase all the programs you created and saved

in the AX3000B, and will load the factory-set programs. MIDI settings will also be

initialized. If there are any settings you want to keep, you should ﬁrst use the data

dump function to back them up, or use the “Program sheet” (the fold-out inside the

back cover of this manual) to write down your settings.

1. While holding down the three buttons ▲/▼, and EXIT switch, turn on the

power.

The display will read “P” and the LED 1–4 buttons will blink, and the name dis-

play will ask “RELOAD?” Release the three buttons you were holding down.

2. If at this point you decide that you really don’t want to execute this operation,

you can press the EXIT switch.

3. Press the WRITE button. The name display will show “LOADING,” and the fac-

tory-set data will begin being reloaded.

When reloading has been completed, the name display will indicate “COM-

PLETE,” and the AX3000B will automatically switch to Program Select Mode.

NOTE: Never turn off the power while this reload operation is occurring.