Korg music workstation/sampler

111

If you want to route the sound through an insert effect

and then into Valve Force, set the post-IFX “BUS Sel.”

to 3/4(Tube), 3(Tube), or 4(Tube).

Use “BUS Sel.” to assign the output of Valve Force.

You can send the output to the L/R bus, the insert

effect IFX1–IFX5 bus, or the 1, 2 buses.

5If you want to sample the sound that has passed

through Valve Force, set “Source BUS” to the ﬁnal

output bus of the Valve Force signal.

You can sample the signal if you’ve set “Placement” to

Insert (Use 3/4 BUS).

Adjusting the Valve Force settings, and sam-

pling

6Adjust the Valve Force settings, and sample the

result.

For the sampling procedure, refer to QS p.21.

Resampling the output of Valve Force

If you want to send a multisample through Valve Force

and resample the result, refer to the example of applying

an insert effect (☞p.70).

In step 6 (☞p.70), set “BUS (IFX) Select” to 3(Tube),

4(Tube), or 3/4(Tube), and then resample.

Valve Force settings for AUDIO INPUT

In Program, Combination, Sequencer, Song Play, and

Media modes, you can send an external audio input from

the AUDIO INPUT 1, 2, or S/P DIF IN jacks through

Valve Force and output the result.

This is speciﬁed by the “Input (COMBI, PROG, SEQ,

S.PLAY, MEDIA)”; the setting is common to each of these

modes (☞p.107, step 1).

As an example here, we will explain the settings for Pro-

gram mode.

1Press the VAL VE FORCE [ON/OFF] key to turn Valve

Force on. (The key will light.)

Placement

2Access the Program P9: Master Effect, VALVE page.

3Use “Placement” to specify the placement of the

Valve Force circuit. (☞p.109, step 3)

In/Out

You can’t use Valve Force on the L/R output from S/

P DIF, nor when resampling the L/R output in the

various modes.

4Specify the input/output destination for the Valve

Force circuit.

If “Placement” = Final:

The external audio source input to the L/R bus will be

sent through Valve Force at the ﬁnal stage of the L/R

output.

Set “BUS (IFX/Indiv.) Select” to L/R or IFX1–IFX5. If

you use IFX1–IFX5, set the post-IFX “BUS Sel.” (inset

FX page) to L/R.

Program

Combination

SequencerSamplingSong PlayGlobalEffectMedia, etcPresetOther