Korg music workstation/sampler

Recording the sound of a combi-

nation or program

Here’s how you can easily copy the settings of a combina-

tion or program, and then record.

There are two ways to do this. While playing in Program

or Combination mode, you can use the Auto Song Setup

function to automatically set up a song using the current

settings of the program or combination. Or, you can use

the page menu command in Sequencer mode to copy the

settings of a program or combination create the sequencer

setup.

Auto Song Setup function

The explanation of the Auto Song Setup function given

here follows the procedure from Combination mode.

1Enter Combination mode.

2If you change any of the settings in the combination.

Such as volume, panning, effect routings and arpeggia-

tor setting (including Arpeggiator On/Off) you must

ﬁrst save the edited settings using “Update Combina-

tion” or “Write Combination.”

The combination (or program) must be saved with

the Arpeggiator On/Off set to On in order for the

“Auto Adjust Arp settings for Multi REC” (see step

4) to work properly.

3Hold down the [ENTER] key and press the

SEQUENCER [REC/WRITE] key.

The “Setup to Record” dialog box will appear.

4Press the OK button to perform the Auto Song Setup.

The TRITON Extreme will automatically switch to

Sequencer mode, and the combination’s settings will

be applied to a new song. The new song will be the ﬁrst

unused song.

5You will automatically enter record-ready mode, and

the metronome will begin sounding according to the

settings in Sequencer mode 0–8: Preference.

(☞PG p.68 “0–8b: Metronome Setup”)

6Press the [START/STOP] key, and realtime recording

will begin.

When you’re ﬁnished recording, press the [START/

STOP] key once again.

(☞p.43 “Realtime recording on a MIDI track”)

Settings that are automatically copied from the combination

The settings that will be automatically copied will be the

same settings as if you had executed the page menu com-

mand “Copy From Combi” (☞PG p.58) and had made the

following settings in the dialog box.

• “with Effects” checked

• “To” set to Track 1 to 8

• “Auto Adjust Arp setting for Multi REC” checked

Settings that are automatically copied from the program

The settings that will be automatically copied will be the

same settings as if you had executed the page menu com-

mand “Copy From Program” (☞p.39) and had made the

following settings in the dialog box.

• “with Effects” checked

• “with Arpeggiator” checked

• “To” set to Track 01

• “Arpeggiator” set to A

Copy From Program/Copy From Combi

(Sequencer mode page menu commands)

Here’s how to use the Copy From Program/Copy From

Combi page menu commands in Sequencer mode.

Make sure that the global MIDI channel (Global P1:

MIDI, “MIDI Channel”) is set to 01.

1Create a new song. (☞p.50)

2Execute the page menu command “Copy From Pro-

gram” or “Copy From Combi.”

A dialog box will appear.

Select the program or combination that you want to

copy (i.e., the copy source).

For this example, press the COMBI BANK [I] key, then

press numeric keys [4], [0], and ﬁnally press the

[ENTER] key. I040: Steely Keys will be selected.

We will copy the effect settings of the combination as

well, so check the “With Effects” check box.

Since we want to copy the settings of the combination’s

eight timbres to tracks 1–8, select Track 1 to 8.

If you have selected Track 1 to 8, you will be able to

select “Auto adjust Arp setting for Multi REC.” If you

check this check box, the MIDI channel etc. of some of

the tracks will automatically be adjusted to ensure that

the same sound as was used during recording will be

reproduced by the playback when you perform multi-

track recording with the arpeggiator turned on.