Korg musical instruments

Front and rear panels Names and functions of objects on the LCD display

Names and functions of objects on the LCD display

The OASYS uses Korg’s TouchView graphical user

interface.

By touching on objects displayed in the LCD screen,

you can select pages, set parameter values, rename

programs and combinations, write data, and perform

many other operations.

a: Current page

This indicates the selected page within the current

mode.

From the left, this shows the current mode, the number

and name of the page group, and ﬁnally the name of

the individual page.

b: Edit cell

When you touch a parameter in the LCD screen, the

parameter or parameter value will usually be

highlighted (displayed in inverse video). This is called

the edit cell, and the highlighted item will be subject to

editing.

The parameter value of the edit cell can be modiﬁed

using the VALUE controllers (☞p.35) or by using a

popup button in the LCD screen. For parameters that

accept a note number or a velocity value, you can also

hold down the ENTER switch and play a note on the

keyboard to enter the note number or velocity value.

c: Popup button

When this button is pressed, a popup menu will

appear, showing the parameter values that are

available for selection.

To enter the parameter value, press the desired value

in the popup menu.

When a popup menu is displayed, using a VALUE

controller (☞p.35) will close the popup menu. If the

popup menu is unlocked (☞“Pin”), it will close if you

touch a location outside the popup menu.

* Popup menu

This switches the popup menu display

between locked and unlocked.

When locked, the pin will be shown closed, and the

popup menu will remain displayed even after you

press a parameter value. When unlocked, the pin will

be shown opened, and the popup menu will close

immediately when you press a parameter value.

d: Select button

When you press this button, a tabbed popup menu

will appear, allowing you to perform the following

selections.

• “Bank/Program Select,” “Bank/Combination

Select”: Select programs or combinations by bank

• “Multisample Select”: Select a multisample for a

program oscillator by category

• “Wave Sequence Select”: Wave sequences for

program oscillators can be chosen by category

• “Effect Select”: Select an effect by category

• Select a sample

• Select a KARMA GE

To close a tabbed popup menu, press the OK button or

Cancel button.

g: Page group Tab

h: Page tab

a: Current page

b: Edit cell

e: (Category) popup button

c: Popup button (1)

d: Popup button (2)

f: Check box i: Page menu buttonMode name Page namePage number