Using the Finisher
Selecting Staple Mode
Depending on the finisher that you have, the following staple positions are available:
Top: Staples on the upper left corner, left margin.
Top: Staples on the upper left corner, diagonal.
Top: Staples on the lower left corner, left margin.
Double: Staples on the left margin in two places.
Saddle Stitch: Staples two staples in the center
1
2
3
Touch the desired Staple
Position key.
Using the keypad, enter the number of copy sets you require.
Set the originals in place, then press the Start key.Your copy sets are stapled and exit to the Finisher Shift Tray.
Selecting Punch Mode
With the optional punch installed, you can have three holes punched into your copy sets.
1
2
Touch the Punch key.
Set the originals in place, then press the Start key. Your copies will exit on the Finishers Shift Tray with holes punched in them.
3 To remove the paper punch outs
from the finisher, refer to “Removing Punch
7 - 4 | Using the Finisher |