Scene mode
Taking pictures with scene modes that match specific situations. If selected,
UIFDBNFSBTFUTUIFPQUJNBMFYQPTVSFBOEIVFUPPCUBJOUIFEFTJSFEQJDUVSF
1. Set ON/OFF switch to ON, mode switch to 
and mode dial to 
The status indicator lights up for about 1 sec.
Switch camera ON, | Select mode |
set mode |
|
2. Press MENU/SET and select a scene in 
menu, aim the camera at your subject
)PMEUIFDBNFSBmSNMZ with both hands
Select desired scene | Aim the AF area at |
| your main subject |
1.Press [MENU/SET], to open the menu.
2.Press to enter the [SCENE MODE].
3.Choose a scene by pressing .
4.Confirm by pressing [MENU/SET].
3. Focus the subject
-To change settings, press
<2.&/6>BOETFMFDU<"'
.0%&>
not focused: |
|
|
|
|
|
|
focused: |
|
|
|
| Focus on subject, press | |
|
|
|
| shutter button halfway | ||
|
|
| ||||
-For more information on how to focus a subject, please see page 30.
-For more information on the different AF settings, please see page 39.
4. Take the picture
-If the writing speed of the
.FNPSZ$BSEJTUPPTMPX
recording may stop.
.PWJFTDBOCFSFDPSEFE
continuously up to 2 GB.
6TFB.#TPSHSFBUFSDBSE when recording in high quality modes.
Press shutter button fully
View picture
The picture is shown for a short time.
HINT | |
ton while you are in the | |
-Depending on the chosen scene mode, some of the following settings may be fixed: The white balance cannot be changed, the flash is forced OFF, the histogram is displayed orange, the AF assist lamp is disabled, the
22