- The optimal white balance will differ depending on the type of fluo- rescent lighting being recorded under so use 
or 
.
:PVDBOmOFMZBEKVTUUIFXIJUFCBMBODFJOEFQFOEFOUMZGPSFBDIXIJUF balance item.
-The white balance fine adjustment level in 
SFUVSOTUP[FSPXIFO you reset the white balance using 
.
[AF MODE] | - | - | - | - | - |
This allows the focusing method that suits the positions and number of the subjects to be selected.
Face detection 1 | Focuses are set to detected faces. |
AF Tracking | Focuses on moving subjects. |
Focuses on any of the 11 AF areas. | |
Focus on the centre of the screen. | |
Spot | Focus on a limited small area of the screen. |
1:FMMPX4IVUUFSCVUUPOJTQSFTTFEIBMGXBZ Green: The camera is focused.
White: Displayed when more than one face is detected.
1Under certain
UJPONBZGBJMUPXPSL<"'.0%&>JTTXJUDIFEUP
.
-When the face is not facing the camera.
-When the face is at an angle.
8IFOUIFGBDFJTFYUSFNFMZCSJHIUPSEBSL
-When there is little contrast on the faces.
-When the facial features are hidden behind sunglasses, etc.
-When the face appears small on the screen.
-When there is rapid movement.
-When the subject is other than a human being.
-When the camera is shaking.
8IFOEJHJUBM[PPNJTVTFE
2:PVDBOGPDVTPOUIFTVCKFDUNPSFRVJDLMZUIBOJOPUIFS"'NPEFT
2The picture may stop moving for a moment before being brought into focus when you press the shutter button halfway. This is not a malfunction.
-The camera is focusing on all the AF areas when multiple AF areas
NBYBSFBTMJHIUBUUIFTBNFUJNF*GZPVXBOUUPEFUFSNJOFUIF focus position to take pictures, switch the AF mode to 
, 
or 
.
-If the AF mode is set to 
, the AF area is not displayed until the picture is brought into focus.
-Switch the AF mode to 
or 
if it is difficult to focus using 
.
-The camera may detect the subjects other than a person as the face. In this case, switch the AF mode to any modes other than 
and then take a picture.
-The AF mode cannot be set in [FIREWORKS] in 
mode.
-It is not possible to set 
JOUIFGPMMPXJOHDBTFT</*()54$&/&3:> 
mode.
39