Lennox Hearth LSO-43, LSO-43-H, MP-36OD, MP-42OD manual

750,141M

06/2006

FIREPLACE KITS AND ACCESSORIES

BI-FOLD GLASS DOORS

INSTALLATION INSTRUCTIONS FOR OUTDOOR BI-FOLD GLASS DOORS

43LBFOD-BS, 42ABFOD-BS & 36ABFOD-BS

These bi-fold glass door assemblies have been designed for use with and may be easily fitted to your Lennox Outdoor Fireplace, Models: LSO-43, LSO-43-H, MP-36OD & MP-42OD.

Do not alter or modify these door assemblies or a fireplace malfunction or a fire hazard may result.

These doors have been tested and listed by Omni-Test Laboratories Inc.

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.

GENERAL INFORMATION

The door assembly consists of a right and left glass panel assembly with the door handles factory mounted. There are no additional parts that are required to install these doors. Fireplaces listed on the front page of this document, have been designed to accept these doors with minimum effort.

Swing the lower corner of the door over the hole in the lower frame and engage the lower pivot pin into the hole on the lower frame of the firebox opening (Figures 1 and 2 ).

Pivot Pin	Roller Pin
Lock

Lower

Frame

Pivot

Point

Figure 1

Step 2. Tilt the top of the door into place and carefully ensure that the upper pivot pin and roller pin is in the upper door guide track.

Step 3. Continue to tilt the top of the door into place until the upper pivot pin engages the spring clip and the pivot pin locks into place within the hole of the spring clip (see Figure 3 ).

TOOLS REQUIRED

Medium Phillips Screwdriver • ³⁄₈" Open-end wrench

INSTALLATION PROCEDURE

Step 1. Starting with the lower end of either the right or left hand door hold the door at a slight angle to the door frame outer edge with the top tilted toward the center.