EPA Wood-Burning Fireplaces
P/N 506023-13 REV. A 02/2011
Brentwood LV
MODEL
Brentwood™ LV
This installation manual will enable you to obtain a safe, efficient and
dependable installation of your fireplace system. Please read and
understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any circum-
stances. Any modification or alteration of the fireplace system, including
but not limited to the fireplace, chimney components and accessories,
may void the warranty, listings and approvals of this system and could
result in an unsafe and potentially dangerous installation.
Lennox Hearth Products wood-burning fireplaces are designed for use
as a supplemental heater. They are not intended for continuous use
as a primary heat source.
INSTALLATION AND
OPERATION INSTRUCTIONS
Listed to standards:
ULC-S610 & UL-127
Report No. 3011202
EPA Cert. No. 537
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
WARNINGS
•
Hot! Do not touch! The glass and
surfaces of this appliance will be hot
during operation and will retain heat
for a while after shutting off the appli-
ance. Severe burns may result.
•
Carefully supervise children in the
same room as appliance.
•
If small children are present in the home, it is
recommended that this appliance be fitted with
an adjustable safety gate or barrier screen.
WARNINGS
•
The fireplace cannot be operated without a door.
Consult your dealer to select the correct door.
•
Important! To assure proper alignment of glass
doors: Install this fireplace in a square and
plumb condition, using shims as necessary at
sides and/or bottom.
•
Install the fireplace only as described in these
instructions.
PIBRENTLV REV. 1 02/2011
TM
Fireplace, Also For Use In
Manufactured Homes With Solid Fuel Only.
THIS UNIT REQUIRES THE INSTALLATION OF A
FINISHING KIT. SEE “PARTS REQUIRED”
SECTION FOR DETAILS
Shown with louver kit installed Shown with clean face kit installed
02/22/2011