16
Figure 12
28.0 POSITIONING OF FIELD REMOVABLE PARTS
WARNING
Failure to position the parts in
accordance with these diagrams
or failure to use only parts specifi-
cally approved with this heater
may result in property damage
or personal injury.
Figure 13
4 off burner
installation
positions
Figure 11
Removal and refitting of glass door
assembly and burner assembly.
Visual check for cor-
rect pilot flame.
The glass panel is
supported by two
self-locking M6
screws, one on
each side
Damper
Fixing
hole
Removal and refitting of the decora-
tive glass facia (see Section 17.0)
Glass Door Removal: Remove
the four (4) screws indicated,
then lift door off.
As our policy is
one of continuous
improvement and
development, we hope
therefore you will
understand we must
retain the right to
amend details and/or
specifications without
prior notice.