screen face kit
MODeL raVeLLe™ 30

instaLLatiOn instrUctiOns fOr instaLLinG screen

face kit fOr Use with the raVeLLe™ 30 Gas firePLace

775,288M
rev. a, 10/2008

HEARTH PRODUCTS

KITS AND ACCESSORIES

Draft

10/27/2008

kit cOntents (see Figure 1):
Please ensure that all these parts are included
1 ea. Screen Face [Complete] (A)
2 ea. Upper Brackets w/Screws (B)
2 ea. 1/4”-20 Lower Face Mounting Screws (C)
6 ea. #10 Washers
6 ea. 10-24 Hex Nuts
1 ea. Instruction Sheet
cat. no. Model Description
75382 screenF-30 screen face, Double Door, Black
a
right bracket to left
side of fireplace.
nOte: DiaGraMs & iLLUstratiOns are nOt tO scaLe 1
GeneraL infOrMatiOn
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
all of these parts may scratch and bend, great care should be used
in handling them.
aLL warninGs anD PrecaUtiOns in the instaLLatiOn anD
OPeratiOn ManUaL PrOViDeD with the aPPLiance aPPLY tO
these instrUctiOns.
tUrn Off the firePLace anD aLLOw it tO cOMPLeteLY cOOL
BefOre PrOceeDinG.
instaLLatiOn instrUctiOns
step 1. Using a 5/32” allen wrench, remove the lower face mounting
brackets from the unit and reverse their locations left to right (see
Figure 2). Re-attach the brackets (see Figure 3) using the existing
10-24 screws. You will need to reverse the speed nuts so that the
flat side is toward the center of the fireplace. The outside dimension
between the brackets should be 28 inches.
Figure 1 - Kit Contents
attach left bracket to
right side of fireplace.
tOOLs neeDeD:
Phillips Head Screwdriver
3/8” Socket or Nut Driver
5/32” Allen Wrench or T-Handle Wrench Figure 2
Left Bracket
cB
TM