Lenoxx Electronics H-5560 WALL MOUNTING (continued)

IB-PH5560-WC-E-040505

Wall Mounting without a Modular Wall Phone Plate

MOUNTING AREA

ANCHOR

MOUNTING SCREW

3/16" (5 MM)

LEAVE 3/16" (5 MM) SCREW EXPOSED

DRILL HOLE WITH 1/4" MASONRY BIT

3 15/16"

(100 MM)

12

WALL MOUNTING (continued)

Make sure space

between holes is

Follow these instructions to mount the phone on the

wall without a wall plate:

1.Locate a wall stud. If it is possible to utilize a wall

stud for mounting, dry wall expanders or a similar

type fastener is recommended. Consult your local

hardware stores for details.

2.Drill 2 holes 3 15/16" (100 mm) apart.

3.Put a screw into each hole and leave 3/16" (5mm)

of the head exposed to mount the phone (screws

are not included).

4.Connect the straight cord to the phone and jack.

5.Place the TELEPHONE BASE on the 2 mounting

screws and gently push down to lock into place.

Installation on Masonry

1.Use a 1/4" masonry drill bit and drill the 2 holes (spaced as above).

2.Insert plastic anchors and install the 2 screws.

3.Leave 3/16" (5 mm) of the screws exposed to mount the phone.

4.Place the TELEPHONE BASE on the 2 mounting screws and gently push down to

lock into place (anchors and screws are not included).

IMPORTANT

Before mounting the phone onto the wall, select a wall area with sufficient strength. If

mounting on the wallboard or in an area of questionable strength, locate a stud for

maximum support of your telephone.

Drill one hole

Drill other hole

100 mm

IB-PH5560-WC-E-040505.pmd 4/8/2005, 10:49 AM14

Contents

Main 13 MEMORY ADJUSTABLE JUMBO DISPLAY CALLER ID TELEPHONE OPERATING INSTRUCTIONS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS IMPORTANT TELEPHONE COMPANY & FCC INFORMATION FCC REGISTRATION LOCATION OF CONTROLS Step 1: Checking the Package Contents INSTALLING BATTERIES Step 2: Powering the Phone FIG. 2 FIG. 3 FIG. 1 Step 3: Telephone Installation ATTACHING THE BRACKET FOR DESK USE SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE Step 4: Setting up the Telephone (Example: 10:53 a.m. On June 18th) Step 4: Setting up the Telephone(continued) SETTING UP LCD CONTRAST, LANGUAGE, AREA CODE, TIME AND DATE Choosing Tone or Pulse Dialing BASICS Making and Receiving Calls MAKING A CALL RECEIVING A CALL Volume Control and Ringer Setting TELEPHONE FEATURES Memory Dialing STORING PHONE NUMBERS INTO MEMORY NOTE TIP 1:If you entered a wrong number, you may press the hook switch, then start from Understanding the Caller ID Service When You Received a Call Viewing the Caller ID List NOTE Storing the Phone Numbers from the Caller ID List NOTE: Deleting the Data from the Caller ID List To delete the Caller ID memory one by one Calling back from the Caller ID List WALL MOUNTING Using Message Waiting/Mailbox To delete ALL the Caller ID memories Deleting the Data from the Caller ID List (continued) Wall Mounting without a Modular Wall Phone Plate WALL MOUNTING (continued) Installation on Masonry IMPORTANT TROUBLE SHOOTING PROBLEMS CHECK CHECK TROUBLE SHOOTING (continued) PROBLEMS LIMITED WARRANTY 2005 LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE CARTERET, N.J. 07008 MADE & PRINTED IN CHINA For customer service