LevelOne GSW-4870TGX Front Panel

This chapter describes the front panel, rear panel, and LED indicators

of GSW-4870TGX.

Front Panel

The figure below shows the front panels of GSW-4870TGX.

Figure 3. Front panel of 48+4G-port Gigabit Ethernet Switch

LED Indicator:

Comprehensive LED indicators display the status of the switch and

the network (see the LED Indicators chapter below).

Fast Ethernet Ports (Port 1~48):

These ports support network speeds of either 10Mbps or 100Mbps,

and can operate in half- and full- duplex transfer modes. These ports

also supports automatic MDI/MDIX crossover detection function

gives true “plug and play” capability, just need to plug-in the network

cable to the hub directly and don’t care if the end node is NIC

(Network Interface Card) or switch and hub.

Gigabit Ethernet Ports (Port 49~50):

GSW-4870TGX is equipped with two Gigabit twisted pair ports,

supported auto negotiable 10/100/1000Mbps and auto MDI/MDIX

crossover detection function. These two ports can operate in half-

duplex mode for 10/100Mbps and full- duplex mode for

10/100/1000Mbps.