N_One Wireless PCI Card

Chapter 3

Using the Windows Utility
This Chapter provides Setup details for the AP mode of the Wireless
Adapter.

Overview

If using Windows, you can use the supplied utility to configure the Wireless interface.
To Use the supplied Windows utility for Configuration
• Right-click the System Tray icon
• From the pop-up menu, select "Restore".
This Chapter assumes you are using the supplied WNC-0600 Wireless LAN utility.

System Tray Icon

If the Wireless LAN Utility is running, you can double-click the icon in the System Tray
to open the application.
If the program is not running, you can start it using the option in the Start menu created
by the installation.
For the Wireless Adapter, this will be Start - Programs - LevelOne – WNC-0600 –
WNC-0600 Wireless LAN Utility.
Status Information
The menu options available from the System Tray icon are:
• Restore - This will display the main screen.
• Radio Off - The wireless adapter is not associated with the network when the
radio is off.
• WZC On - Wireless Zero Configuration (WZC), is a service of Microsoft Windows
which dynamically selects a wireless network to connect.
• Exit - Terminate the connection to the Wireless Adapter.
Figure: Wireless Adapter menu
13