Lexicon PCM 80 manual Format, Row MIDI 3.0 Reset, Receive, Transmit, Pgm Change

PCM 80 User Guide Lexicon

2.2 Format

This control allows you to format a Memory Card for PCM 80 use. Press Store and insert an unformatted card (or one you don't mind erasing). Make sure the Write Protect latch on the card is set to Off. Press Store. The display will ask "Are you sure?" (Press STORE). Press Store. The following display will appear briefly.

Format and name

memory card

The display will then change as shown below.

Card Name: New Card

(press STORE)

This display allows you to assign a name (of 10 characters or less) to the card. A blinking cursor indicates that a particular character is available for changing. Use ADJUST to select the character you want in that position. Turn SELECT to move the cursor to another character. Press Store to execute. The display will ask "Are you sure?" (Press STORE). Press Store again to complete the operation. Press any front panel button to cancel.

Row 3

MIDI

3.0 Reset

This control resets all patched parameters to their previously stored values. When this control is activated, a MIDI "Reset All Controllers" message is also transmitted on the current channel by the PCM 80.

3.1 Receive

Turn ADJUST to select OFF, 1-16, or OMNI for receipt of MIDI messages.

3.2 Transmit

Turn ADJUST to select OFF, or 1-16for transmission of MIDI messages.

3.3 Pgm Change

This control specifies the PCM 80's response to incoming MIDI Program Change messages. There are four selections available via ADJUST: On, Off, Map and Chain.

2-12