RT-10

Troubleshooting & Maintenance

2.If the loaded disc was recorded in 24 frames-per-second progressive-scan format, the RT-10 misses one-in-six frames. Because of this, frame numbers appear discontinuous and the frame + time search mode might not find the selected frame.

MISCELLANEOUS ISSUESThe RT-10 is exhibiting erratic behavior.

1.Press the front panel On/Off button to power the RT-10 off. Wait 10 seconds. Then, press the On/Off button again to power the RT-10 on.

2.Record all user-defined settings on the installation worksheet that begins on page A-17. Then, follow the instructions on page 5-16 to restore factory-default settings.

If all else fails . . .

1.Press the front panel On/Off button to power the RT-10 off. Wait 10 seconds. Then, press the On/Off button again to power the RT-10 on.

2.Record all user-defined settings on the installation worksheet that begins on page A-17. Then, follow the instructions on page 5-16 to restore factory-default settings.

3.Contact an authorized Lexicon dealer.

4.Contact Lexicon Customer Service at 781-280-0300 or www.lexicon.com.

RT-10 MAINTENANCE

The RT-10 exterior surface can be cleaned with a soft, dry, lint-free cloth. Do not use a cloth made with steel wool or metal polish. Do not soak the cloth in alcohol, benzene, acetone-based cleaners, or strong commercial cleaners. If the RT-10 is located in a dusty environment, a low-pressure blower can be used to remove dust from its exterior surface.

Replace the remote control batteries as needed (1-9). The remote control requires two AA batteries. It is strongly recommended to use Alkaline batteries, which last longer with- out leaking.

Refer to the Installation Considerations section that begins on page 1-3 for information about preventative maintenance.

Note:

The RT-10 lens should not become dirty or damaged from regular use. However, if malfunction occurs, contact an authorized Lexicon dealer for assistance. Do not attempt to clean the lens with a commercially available DVD or CD lens cleaner, as some of these products might damage the RT-10 lens.

5-15