Lexmark 41H0000, 41G0100, 41G0050, C748x, C746x manual Accessing the system board

Models: 41G0050 C746x 41H0000 41G0100 C748x

1 278
Download 278 pages 44.17 Kb
Page 16
Image 16

Additional printer setup

16

Accessing the system board

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Note: This task requires a flathead screwdriver.

1Remove the system board cover.

aTurn the screws on the cover counterclockwise to loosen them, but do not remove them. Pull the standard tray to access the two bottom screws.

bSlide the cover slightly up until each screw is in the keyhole.

Page 16
Image 16
Lexmark 41H0000, 41G0100, 41G0050, C748x, C746x manual Accessing the system board