Try one or more of the following:
•Touch Continue if no scan job is active when the attendance message appears. This clears the message.
•Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears
the message.
•Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
•Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immedi ately after the
last successfully scanned page.
•Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successful ly scanned
page, but the job is not canceled. Successfully scanned pages go to the ir destination: copy, fax, e-mail, or FTP.
•Touch Restart job if job recovery is active and you are able to restart the job. The message clears. A new scan job
containing the same parameters as the previous job starts.
293.02 Flatbed Cover Open
Close the scanner cover.
840.01 Scanner Disabled
This message indicates that the scanner has been disabled by the s ystem support person.
841‑846 Scanner Service Error
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Check all cable connections.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
If the service message appears again, then contact Customer Support, and report the message.
900–999 Service <message>
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Check all cable connections.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
If the service message appears again, contact Customer Support, and report the message.
Understanding printer messages 240