Notes:
•Do not exceed the maximum stack height by forcing paper under the stack height limiter.
•Do not load or close a tray while a job is printing.
•Load only one size and type of paper or specialty media at a time.
•Load envelopes with the flap side down.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self‑stick adhesives. These envelopes may severely damage the pr inter.
6Adjust the width guide to lightly touch the edge of th e paper stack.
Note: Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.
7From the printer control panel, set the Paper Size and Paper Type.
Loading the envelope feeder
1Adjust the envelope support for the length of envelope you are loading:
•Short envelopes—Fully close the envelope support.
•Medium‑length envelopes—Extend the envelope support to t he middle position.
•Long envelopes—Fully open the envelope support.
2Lift the envelope weight back toward the printer.
3Slide the width guide to the right.
Loading paper and specialty media 74