Use To
On Reduce printer noise.
Notes:
•Print jobs are processed at a reduced speed.
•Printer engine motors do not start until a document
is ready to print. There will be a short delay before
the first page is printed.
Off Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
3Click Submit.
Adjusting Sleep mode
1From the home screen, navigate to:
> Settings > General Settings > Timeouts > Sleep Mode
2In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.
3Apply the changes.
Using Hibernate mode
Hibernate is an ultra‑low‑power operating mode.
Notes:
•Three days is the default amount of time before the printer ent ers Hibernate mode.
•Make sure to wake the printer from Hibernate mode befor e sending a print job. A hard reset or a long press of
the Sleep button wakes the printer from Hibern ate mode.
•If the printer is in Hibernate mode, then the Embedded Web Server i s disabled.
1From the home screen, navigate to:
> Settings > General Settings
2From the “Press Sleep Button” or “Pres s and Hold Sleep Button” menu, select Hibernate, and then touch Submit.
Adjusting the brightness of the printer display
To save energy, or if you are have trouble reading from the display, adjust the brightness of the display.
Select from 20 to 100. The factory default setting is 100.
Using the Embedded Web Server
1Open a Web browser, and then type the printer IP address in the address field.
Saving money and the environment 239