Memory full, cannot send faxes
1From the printer control panel, touch Conti nue to clear the message and cancel the fax job.
2Try one or more of the following:
•Reduce the fax resolution, and then resend t he fax job.
•Reduce the number of pages in the fax, and then resend t he fax job.
No analog phone line connected to modem, fax is disabled.
Connect the printer to an analog phone line.
Network [x] software error [54]
Try one or more of the following:
•From the printer control panel, touch Conti nue to continue printing.
•Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web
site at http://support.lexmark.com.
Non‑Lexmark [supply type], see User’s Guide [33.xy]
Note: The supply type can be a toner cartridge or the ima ging unit.
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies
or parts may affect the performance, reliabili ty, or life of the printer and its imaging components.
All life indicators are designed to function with L exmark supplies and parts, and may deliver unpredictable results if
third-party supplies or parts are used. Imaging compon ent usage beyond the intended life may damage your Lexmark
printer or associated components.
Warning—Potential Damage: Use of th ird-party supplies or parts can affect warranty coverage. Damag e caused by
the use of third-party supplies or parts may not be covered by t he warranty.
To accept any and all of these risks, and to proceed with the us e of non-genuine supplies or parts in your printer, touch
and hold and the # on the printer control panel simultaneou sly for 15 seconds to clear the message and continue
printing.
If you do not want to accept these risks, then remove the third-party supply o r part from your printer, and then install
a genuine Lexmark supply or part.
Note: For the list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit
www.lexmark.com.
Not enough free space in flash memory for resources [52]
Try one or more of the following:
•From the printer control panel, touch Conti nue to clear the message and continue printing.
•Delete fonts, macros, and other data stor ed in the flash memory.
Troubleshooting 305