Unsupported camera mode, unplug camera and change mode
The camera mode does not support PictBridge.
Unplug the camera, change the mode and plug the camera ba ck into the printer.
Unsupported disk
Remove the unsupported printer hard disk, and t hen insert a supported one.
Unsupported option in slot [x] [55]
1Turn off the printer.
2Unplug the power cord from the electrical outlet.
3Remove the unsupported option card from the printer co ntroller board, and then replace it with a supported card.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
USB port [x] disabled [56]
From the printer control panel, touch Continue to clear the message.
Notes:
•The printer discards any data received through the USB port.
•Make sure the USB Buffer menu is not set to Dis abled.
Weblink server not set up. Contact system administrator.
From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your s ystem support person.
Solving printer problems
•“Basic printer problems” on page 315
•“Hardware and internal option problems” on page 317
•“Paper feed problems” on page 320
Troubleshooting 314