7Close the access cover.
Installing a memory card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the pr inter, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Contro ller board electronic components are easily damaged by static electricity.
Touch something metal on the printer first before t ouching any controller board electronic components or
connectors.
An optional memory card can be purchased separately and attache d to the controller board.
1Access the controller board.
For more information, see “Accessing the controller board” on page 28.
2Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the ca rd. Doing so may
cause damage.
Additional printer setup 32