26
Installation
* Adjustment for screen Resolution, Position, Size, and Phase
* Initializing (Reset to original factory values)
- To initialize the adjusted values
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size This function is to minimize
any vertical bars or stripes
visible on the screen back-
ground. And the horizontal
screen size will also
change.
Phase This function allows you to
remove any horizontal noise
and clear or sharpen the
image of characters.
Resolution This function allows you
select Resolution of
XGA/WXGA.
Mini Glossary
- When RGB connect to PC input and select the RGB-PC, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
Press the ADJUST button and then use DD / EEbutton to select
Resolution, Position, Size, or Phase.
Press ENTER button and then use DD / EE/ FF / GG buttons to
make appropriate adjustments.
• The Phase adjustment range is -16 ~ +16.
(In HDMI/DVI-PC mode, Phase is not available.)
• The Size adjustment range is -30 ~ +30.
(In HDMI/DVI-PC mode, Size is not available.)
Press ENTER button.
1
2
3
Press the ADJUST button and then use DD / EEbutton to select
the Reset option.
Press ENTER button and then use FF / GG button to select Yes.
Press ENTER button.
1
2
3
Screen Setup for PC mode
TVTV
INPUT
INPUT
DVD
RATIO
EZ SOUND
INFO
ADJUST
EZ PIC
CC
SAP
VCR
POWER
COMP1
MODE
COMP2 HDMI
RGB-PC
ADJUST
TVTV
INPUT
INPUT
DVD
RATIO
EZ SOUND
INFO
ADJUST
EZ PIC
VCR
POWER
COMP1
MODE
COMP2 HDMI
RGB-PC
ADJUST
* When you change the resolution, select the proper resolution
in present input to see the best picture appearance.
1024 X 768
1280 X 768
1360 X 768
1366 X 768
Close
Close