Installer Menu (Cont.)
Installer Menu Items 078 through 122
Menu | Function | Value Range | Default Value | Brief Description of Function | |
Item | |||||
|
|
|
| ||
078 | UPN MSB | 0 ~ 255 | 0 | User programmable number, most significant byte. | |
079 | UPN | 0 ~ 255 | 0 | User programmable number, most significant byte - 1. | |
080 | UPN | 0 ~ 255 | 0 | User programmable number, most significant byte - 2. | |
081 | UPN LSB | 0 ~ 255 | 0 | User programmable number, least significant byte. | |
082 | CHKSM ERROR | 0 / 1 | 1 | Enforces rigid MPI checksum. | |
083 | HANDSHK TIME | 0 ~ 5 | 5 | Relaxes MPI timing to be compatible with | |
controlled systems. | |||||
|
|
|
| ||
084 | PERMANENT BLK | 0 / 1 | 0 | Removes block hours setting for Parental Control and makes block permanent. | |
087 | REAR RGB EN. | 0, 1, 17 | 1 | Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB input. | |
Set to 1 to enable RGB input. Set to 17 for Auto Configure. | |||||
|
|
|
| ||
088 | EN NOISE MUTE | 0 / 1 | 1 | If set to 1, audio is muted if no signal is present. | |
090 | KEY LOCK | 0 / 1 | 0 | If set to 1, all display panel buttons are locked. IR is still functional. | |
091 | HDMI2 ENABLE | 0 ~ 2 | 1 | Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as | |
applicable, to enable HDMI 2. | |||||
|
|
|
| ||
092 | HDMI3 ENABLE | 0 ~ 2 | 1 | Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as | |
applicable, to enable HDMI 3. | |||||
|
|
|
| ||
093 | RJP AVAILABLE | 0, 1, 2, 5, 6 | 0 | Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See | |
detailed descriptions.) | |||||
|
|
|
| ||
094 | SAP MENU EN | 0 / 1 | 1 | Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on | |
Function Menu. | |||||
|
|
|
| ||
096 | DEF. ASP. RATIO | 0 ~ 4 | 2 | Sets default aspect ratio at power up. See detailed descriptions and item 106. | |
097 | AUDIO OUTPUT | 0 ~ 9 | 7 | Set as required in accordance with external audio equipment connected to the | |
TV. See detailed descriptions. | |||||
|
|
|
| ||
098 | PRO:CENTRIC | 0 ~ 2 | 0 | Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for | |
GEM (Java Application) Mode. | |||||
|
|
|
| ||
099 | BACK LIGHTING | 1 ~ 200, 255 | 255 | Sets the level of the TV picture back lighting. (See detailed descriptions.) | |
102 | ATSC BAND | 0 ~ 4 | 4 | Selects ATSC band. | |
103 | ATSC TUNE MODE | 0 / 1 | 1 | Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan. | |
104 | START MINOR CH | 0 ~ 255 | 0 | Selects Minor Start Channel. Set to 0 for NTSC. | |
106 | ASP RATIO LOCK | 0 / 1 | 0 | To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on | |
power cycle. | |||||
|
|
|
| ||
116 | VIDEO MUTE EN | 0 / 1 | 0 | Set to 0 for Normal. Set to 1 for Blank. | |
117 | FACT DEFAULT | 0 / 1 | 0 | Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings. | |
118 | POWER SAVINGS | 1, 3, 7 | 3 | Determines the powered status of the embedded | |
GAME CONTROL/MPI port. (See detailed descriptions.) | |||||
|
|
|
| ||
|
|
|
| Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by | |
119 | DATA CHANNEL | 0 ~ 135, 255 | 255 | the Pro:Centric server as its data channel. Set to 255 to use Auto Search to | |
|
|
|
| find the Pro:Centric RF channel. (See detailed descriptions.) | |
121 | P:C RF WAKE HR | 0 ~ 23, 128 | 128 | Sets the hour for Wake On RF. The value “128” is displayed as “OFF.” Directly | |
entering 128 turns the Wake On RF feature OFF. | |||||
|
|
|
| ||
122 | P:C RF WAKE MN | 0 ~ 59 | 0 | Sets the minute for Wake On RF. |
Caution: Installer Menu settings may affect options available from the TV setup menus or the Function Menu.
23 |