FTG Mode via CPU (Cont.)
Learning FTG Configuration from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 45 to 46. However, if necessary, this option enables you to save (Learn) an FTG Configuration file from an LP645H TV to a USB memory device.
The option to save (Learn) an FTG Configuration file from a TV may be desirable or required in either of the following situations:
•If you want to save customized TV setup menu settings to the FTG Configuration file (in addition to the FTG Channel Map and FTG Installer Menu settings).
•If you do not know the RF channels at the site.
Before You Begin
•If the TV is NOT already in FTG Mode, you may need to perform some manual configuration on the TV before you start this procedure (see “Optional Manual Configuration / TV Setup” on next page).
•If you intend to use the TV Zoning feature, make sure to assign a TV Zone # as described in Reference section, “Using the TV Zoning Feature,” BEFORE continuing with the procedure below.
Learn FTG Configuration
1.Turn ON the TV, and then insert a USB memory device into the USB IN port on the TV.
2.Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
3.Use the arrow navigation keys to select/highlight either the Option menu icon from the TV setup menus or the Lock menu icon from the Function Menu. Then, press the number “7” key a total of seven times to display the USB Download Menu.
4.To gain access to the Learn From TV options in the USB Download Menu, key in the password used to access the Installer Menu (Example: Press
5.Use the Up/Down arrow keys to select Learn From TV (TLX), and then press OK.
6.To differentiate this .tlx file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press OK when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. Do NOT remove the USB device until Learning is complete. When the Learning process is complete, the USB Download Menu will reappear on the screen.
7.When Learning is done, press
on the Installer Remote to exit the USB Download Menu, and remove the USB memory device.
Note: It is highly recommended that you open this FTG Configuration file in the FTG File
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous
OK
Learn From TV (TLX)
Select the file name and press OK to start
| ► |
|
|
| |
| ► |
|
|
|
|
| Previous | OK |
Learn From TV
UPDATING...
25%
Do not unplug!
48 |