FTG Mode of Operation (Cont.)

(Continued from previous page)

Note: In order for the proper location-specific TV Zone profile data to be applied, the Zone designation must be assigned in the Target TV(s) BEFORE Teaching is performed.

3.Insert the USB memory device that contains the FTG Configuration file into the USB port.

4.Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).

5.Use the arrow navigation keys to select/highlight either the Option menu icon from the TV setup menus or the Lock menu icon from the Function Menu. Then, press the number “7” key a total of seven times to display the TV Manager / USB Download Menu.

6.With the TV Manager / USB Download Menu on display, use the Up/Down arrow keys to select Teach To TV (TLX), and then press OK.

TV Manager

USB

Ez Download

 

Logo Image Download

 

 

 

Upgrade TV Software

 

Upgrade PTC Software

 

Teach To TV (TLX)

 

 

Teach To TV (TLL)

 

 

7.In the Teach To TV (TLX) window, use the Up/Down arrow keys to select the FTG Configuration file you want to install.

Note: Filenames for TLX files that were Learned from a TV are comprised of the TV model and a five-digit number, for example, xxLY560M-UA00005.TLX.

8.Select the desired Channel Tuning / Channel Banner Display option at the right side of the Teach to TV (TLX) window:

•Press the green button on the Installer Remote to select Logical tuning, or

•Press the yellow button on the Installer Remote to select Physical tuning.

A checkmark will appear at the left of the selected option. Logical tuning is selected by default.

CC

Previous

OK

Teach to TV (TLX)

 

xxLY560M-UA00005.TLX

Channel Tuning /

Channel Banner Display

 

 

Logical

 

 

Physical

CC

Previous

OK

Updating TLL File... 50 %

Do not remove the USB from the port! Do not unplug!

9. Press OK when you are ready to initiate the Teaching process.

xxLY560M-UA00005.tx

Teaching status will be shown on a progress bar in a new window. Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the TV Manager / USB Download Menu.

10. Remove the USB memory device from the Target TV, and verify that the FTG Configuration is now resident on the Target TV.

Note: If it was previously in Pass-though Mode, the Target TV CPU is now in FTG Mode.

After the Teaching process is complete, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified, the TV will tune to that channel, though a channel banner will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your selection in step 8, the channel banner will display either the Start Channel’s logical channel number or physical RF channel number). Otherwise, the TV will simply tune to the first channel in the FTG Channel Map. Remember that the channels in the FTG Channel Map are always arranged in logical order, regardless of your selection in step 8.

206-4261

49